Posts

Showing posts with the label OC1

Guadaloupe Downwind Camp with Woo

Image
January 2018. Guadeloupe Downwind Camp. Woo. Let's just start with the action, my first successful downwind: This is an edited version of an approximate 10K downwind run from Petite Anes to St. Francois. I don't wear a GPS, so the paddle path is general, based on our southerly trek against the wind and waves until we turned east to make the downwind run. My technique is truly lacking here, but I started to get the feel for timing, and I did not huli . Which is a little remarkable given some of the action. I am a novice OC1 paddler, or as my new paddler friend J.P. told me in French, a debutante .  Fool might be a more appropriate word. What was I thinking taking on the Caribbean Ocean? This was probably my 8th paddle in an OC1 ever . I had spent more time fixing my canoe than I did paddling it during the 2017 season. (Vintage Puakea Kaku, see previous repair blog entries). I did get to spend a lot of quality time in an OC2 in the New York harbor and signing up for Woo ...

Salty Metal: Replacing Rusted Rudder Cables with Spectra* (Plastic)

Image
Did you know we live in a mostly metallic world? That salt you like to shake on your dinner? Metal. That saltwater you like to play in? Metallic water. Those rusted rudder cables that snapped on you just when you least expected it? Rusted metal. So what is metal, and why do we think our stainless steel cables are strong, say, in comparison to plastic? If you've landed on this blog, it's because you like me need to swap out your rudder cables, and you've come across an alternative cable, likely named Spectra. As you can see from this periodic table of the elements, most of our elements are metal. Loosely defined, a metal is an element that bonds atomically with itself in a fluid manner. Stainless steel is an alloy of iron and chromium as well as other metal elements namely nickel and molybdenum (Mo, number 42). What makes your rudder cable strong is not so much the willingness of its metal elements to bond to one another but the number of strands wound into the cable....

Milford on the Rocks - OC1 Race July 15, 2017

Image
The GhostHope Kaku, with her razzle-dazzle of matte-white and off-white and blemishes of sunbeam yellow, was as anxious to get on the water as I was. We reviewed the short course of the Milford OC1/OC2, Surfski and SUP race but were encouraged to just go for the long race. I countered to the organizer, Ted, that the Luau would be held up by your humble narrator, but he insisted, saying "Everyone has a first race." Canoes Lining up on the Milford Gulf Beach A few words about the Gulf Beach: it's a beautiful sandy arc and home of the Manu'iwa Outrigger Club. If it weren't for the interconnectivity of the sport and our planet's waters, I would scarcely think of visiting these waters, which are fairly spectacular. Charles Island, in the near distance, gives the racing eye a focal point beyond the endlessly unrolling shore and seductive points - you know, those points you look at during a race, thinking the finish is just around those rocks? Charles Island...

Planet Ocean and Boat Floating

Image
This post will serve as an introduction to the greater topic of paddling and allow me to meander to thoughts about water, especially salt water, without which there would be no need for outrigger paddling. These thoughts about our planet ocean tie into the repair thread in that I am taking into consideration the force of the collision between the hull and the standing waves of water. I discussed this with my repair mentor Gil, and while it is certainly impossible to calculate where the bow bounces against wave peaks the most, the last thing I want is the hull to crack like an egg against waves or any flotsam. I am guilty of salvaging a 1966 Chevy Chevelle that had a tree fall on it, but it's hard to sink in an old Chevy. If I get my boat repair wrong and hit a reef, so to speak, this could be life threatening. This hull repair must be brought to 110% integrity. Okay, how? While it was decided that the top of the canoe should be cut open to fix it from the inside, there was conc...

Puakea OC1 Rescue

Image
What kind of OC1 costs $175? Well, who knows? But that was the price tag the night I randomly googled for used outrigger canoes. 1: usually the hits are scarce. 2: usually the listings are for OC's almost as expensive as new. 3: usually these OC's are in California or Hawaii. They are never in Lousiana and certainly not on a Louisiana Air Force Base. But there it was, $175 on eBay. It was listed as a fixer upper missing a rudder. Well, since I've thrown away a couple hundred dollar bills on much more foolish things, I gambled and bought it. The seller was kind enough to wrap it in its case and bubble wrap the ama and i'aku's as well as the seat. Federal Express was dumb enough to lose the X-shaped PVC cradles it was sitting on. The Fedex guys who carried it out marveled at how light it was, but I was concerned that the boat had parted ways with the cradles and been rolling around in transit  There is no way to insure a used craft like this, so it was all par...